Expand all | Collapse all

vMX configuration by Contrail

Jump to Best Answer
  • 1.  vMX configuration by Contrail

    Posted 02-21-2018 23:12

    Can we configure vMX as a gateway with the device manager in Contrail?

    I am using Contrail 3.2.8 and vMX 17.4 and put the configurations from the Contrail GUI,

    while following the instrucutions. But I cannot not see any configurations in the vMX which

    are added by the device manager.  


    The reference is here.


    There is a similar example but it seems to me that the vMX gateway is manually configured in advance.

  • 2.  RE: vMX configuration by Contrail
    Best Answer

    Posted 02-22-2018 02:44



    Yes, it should work. Make sure you have NETCONF enabled. When you enter Vendor and Model in Contrail GUI, make sure it is "Juniper" and "MX" (NOT "vMX").


  • 3.  RE: vMX configuration by Contrail

    Posted 02-26-2018 06:30



    Thank you for your support.

    I used "Juniper" and "vmx" or "vMX".


    So let me try with "Juniper" and "MX" later.