Hi All
I'm new on this community and i have an issues with ethernet switching result to my QFX5100
Actually i have to redundant site on each of the site i have a QFX5100 switch witch is connected to a switch operator equipement .
On one of the site i can see the mac-address of operator equipement as you can see below
show ethernet-switching table vlan-id 1206
MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static
SE - statistics enabled, NM - non configured MAC, R - remote PE MAC, O - ovsdb MAC)
Ethernet switching table : 2 entries, 2 learned
Routing instance : default-switch
Vlan MAC MAC Age Logical
name address flags interface
INTERCO_1 02:00:00:00:00:04 D - xe-1/0/31.0
INTERCO_1 d4:04:ff:yy:5d:xx D - xe-1/0/44.0
show vlans 1206 extensive
Tag: 1206
Internal index: 121, Generation Index: 125, Origin: Static
MAC aging time: 300 seconds
Interfaces:
xe-1/0/31.0*,tagged,trunk
xe-1/0/44.0*,tagged,trunk
Number of interfaces: Tagged 2 , Untagged 0
Total MAC count: 2
And for the second site i see nothing as you can see below
show ethernet-switching table vlan-id 1214
Routing instance : default-switch
Vlan MAC MAC Age Logical NH RTR
name address flags interface Index ID
INTERCO_2 d4:04:zz:5e:yy:xx D - xe-1/0/44.0 0 0
show vlans 1214 extensive
Tag: 1214
Internal index: 176, Generation Index: 180, Origin: Static
MAC aging time: 300 seconds
VXLAN Enabled : No
Interfaces:
xe-1/0/31.0*,tagged,trunk
xe-1/0/44.0*,tagged,trunk
Number of interfaces: Tagged 2 , Untagged 0
Total MAC count: 1
There are some ho know what is the problem?
And why wehave two differents results what is this :
NH RTR
Index ID
0 0
????
------------------------------
Mamadou Bah
------------------------------