Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  QFX5100

    Posted 08-04-2021 11:38
    Hi All
    I'm new on this community and i have an issues with ethernet switching result to my QFX5100
    Actually i have to redundant site on each of the site i have a QFX5100 switch witch is connected to a switch operator equipement .
    On one of the site i can see the mac-address of operator equipement as you can see below

    show ethernet-switching table vlan-id 1206

    MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static
    SE - statistics enabled, NM - non configured MAC, R - remote PE MAC, O - ovsdb MAC)

    Ethernet switching table : 2 entries, 2 learned
    Routing instance : default-switch
    Vlan MAC MAC Age Logical
    name address flags interface
    INTERCO_1 02:00:00:00:00:04 D - xe-1/0/31.0
    INTERCO_1 d4:04:ff:yy:5d:xx D - xe-1/0/44.0

    show vlans 1206 extensive
    Tag: 1206
    Internal index: 121, Generation Index: 125, Origin: Static
    MAC aging time: 300 seconds
    Interfaces:
    xe-1/0/31.0*,tagged,trunk
    xe-1/0/44.0*,tagged,trunk
    Number of interfaces: Tagged 2 , Untagged 0
    Total MAC count: 2

    And for the second site i see nothing as you can see below
    show ethernet-switching table vlan-id 1214

    Routing instance : default-switch
    Vlan MAC MAC Age Logical NH RTR
    name address flags interface Index ID
    INTERCO_2 d4:04:zz:5e:yy:xx D - xe-1/0/44.0 0 0

    show vlans 1214 extensive

    Tag: 1214
    Internal index: 176, Generation Index: 180, Origin: Static
    MAC aging time: 300 seconds
    VXLAN Enabled : No
    Interfaces:
    xe-1/0/31.0*,tagged,trunk
    xe-1/0/44.0*,tagged,trunk
    Number of interfaces: Tagged 2 , Untagged 0
    Total MAC count: 1

    There are some ho know what is the problem?

    And why wehave two differents results what is this :
    NH RTR
    Index ID
    0 0
    ????

    ------------------------------
    Mamadou Bah
    ------------------------------


  • 2.  RE: QFX5100

    Posted 08-05-2021 09:15
    There are some ho can reply me please ?
    Thank you

    ------------------------------
    Doumba Dowberdhe
    ------------------------------



  • 3.  RE: QFX5100

     
    Posted 08-05-2021 16:16
    Hi,

    There isn't much to go on based on the information presented. A simple diagram to explain how these devices interface and their roles L2, L3. I suspect the switch is just not receiving frames therefore not installing any mac entries. Wish i could provide more feedback.

    Thanks,


  • 4.  RE: QFX5100

    Posted 08-06-2021 16:14
    Hi MFB
    Thank you for your reply please find attached the diagram sorry for my bad english


    ------------------------------
    Doumba Dowberdhe
    ------------------------------



  • 5.  RE: QFX5100

    Posted 08-09-2021 13:21
    Hello 
    do you see the diagram witch i send you ?
    to understand my issue

    ------------------------------
    Doumba Dowberdhe
    ------------------------------