Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  Ex4200 uplink module with 2x1g port not show

    Posted 12-08-2021 05:38
    Hi ,
    Thanks for all helps in the past. I wonder if anyone has met the same challenge or I missed something.

    I tried to set up LAG link to connect to Ciena 5160 but the uplink module 1g port won't show.
    set chassis fpc 0 pic 1 sfpplus pic-mode 1g
    root@C13-45-Junper-4200# run show chassis pic fpc-slot 0 pic-slot 1
    FPC slot 0, PIC slot 1 information:
      Type                             2x 10GE SFP+
      State                            Online
      PIC version                  1.7
      Uptime                         57 minutes, 45 seconds
    
    
    PIC port information:
                             Fiber                    Xcvr vendor       Wave-    Xcvr
      Port Cable type        type  Xcvr vendor        part number       length   Firmware
      0    unknown cable     n/a   CIENA-WXZ          XCVR-A10Y31       1310 nm  0.0
      1    unknown cable     n/a   CIENA-WXZ          XCVR-A10Y31       1310 nm  0.0
    
    
    {master:0}[edit]
    root@C13-45-Junper-4200# run show interfaces ge-0/1/0
    error: device ge-0/1/0 not found

    Thanks in advance!



    ------------------------------
    KEITH GAO
    ------------------------------


  • 2.  RE: Ex4200 uplink module with 2x1g port not show

     
    Posted 12-09-2021 05:43
    Did you commit the change?


  • 3.  RE: Ex4200 uplink module with 2x1g port not show

    Posted 12-10-2021 16:51
    Thank you very much @smicker! 
    You nailed it!  Coming from Cisco background always expect the commands take effect automatically :-)​

    ------------------------------
    KEITH GAO
    ------------------------------