Hello,
I have configured a l2circuit connection between two EX 4600.
On Customer Side A I configured a douple tag VLAN:
flexible-vlan-tagging;
unit 1002 {
description "Test 4";
vlan-tags outer 0x8100.1002 inner 0x8100.110;
family inet {
address 172.26.3.2/30;
The EX4600 on side A is configured as follow:
flexible-vlan-tagging;
encapsulation vlan-ccc;
unit 1002 {
description "Test 4";
encapsulation vlan-ccc;
vlan-id 1002;
family ccc {
filter {
input 100m-ff;
}
}
}
On Side B I want to remove the outer VLAN tag on the EX4600 so that the customer only gets the C-VLAN:
flexible-vlan-tagging;
encapsulation vlan-ccc;
unit 1002 {
description "Test 4";
encapsulation vlan-ccc;
vlan-id 1002;
input-vlan-map push;
output-vlan-map pop;
}
If the C-VLAN ID 110 is configured for customer B, I can see the address 172.26.3.2 in the ARP, but I cannot ping it.
At customer device A. the arp is empty.
If S-VLAN + C-VLAN is configured on both sides, it works and via "monitor traffic layer2-headers" I can also see both tags.
It looks like the EX4600 on side B will not add the Outer S-VLAN 1002.
Does adding / removing the vlan id have to be configured differently?
In addition, several single tagged vlans are to be transferred to the interface.
Thanks for your support!
------------------------------
MAURICE DEMMER
------------------------------