Hello,
I am currently trying to setup VRRP (v3) between 2 MX204.
Between those MX204, I have QFX3500 with junos 15.1R7.9 (Latest available).
The configuration is pretty simple :
interfaces {
xe-0/0/6 {
description "Core: to sw01 (10G 1550nm)";
ether-options {
auto-negotiation;
flow-control;
}
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members [ HCT-MGMT AP-Datacenter NAT ];
}
storm-control default;
}
}
}
et-0/1/0 {
description "Core: mx204 {et-0/0/0}";
ether-options {
auto-negotiation;
flow-control;
}
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members [ AP-Datacenter NAT ];
}
storm-control default;
}
}
}
}
vlans {
AP-Datacenter {
description AP-Datacenter;
vlan-id 3016;
}
NAT {
description "NATed Customers";
vlan-id 3085;
}
}
But when I do monitor traffic interface et-0/1/0.0 match vrrp I see only the VRRP packet from the mx204 directly connected on it but not from the port xe-0/0/6...
Same issue with monitor traffic interface xe-0/0/6.0 match vrrp, I see only traffic comming from sw01 but not the traffic that should be forwared from et-0/1/0.0.
Is there any specific setup to let the QFX forward suck packets?
Regards
------------------------------
KEVIN LOUTZ
------------------------------