Switching

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  EX-4600 unconnected uplink interface showing error.

    Posted 11-12-2021 05:38
    Hi Team,

    I have implemented a ex-4600 (2vc) as distribution. The unconnected uplink interface et-0/0/24 (i.e without sfp) showing following error messages for every second. Due which it is increasing the cpu utilization presently 77%

    fpc0 : dcbcm_drv_port_get_link_status: Port Phy control get failed for port 24 error Feature unavailable

    fpc1 : dcbcm_drv_port_get_link_status: Port Phy control get failed for port 24 error Feature unavailable



    ------------------------------
    NAVEEN M
    ------------------------------


  • 2.  RE: EX-4600 unconnected uplink interface showing error.

     
    Posted 11-12-2021 14:49
    Hi Naveen,

    Port 24 refers to the BCM port and not the front panel port.

    Please check if you have any port configured as VCP but unused/down and delete them.

    switch> show virtual-chassis vc-port




  • 3.  RE: EX-4600 unconnected uplink interface showing error.

    Posted 11-15-2021 05:46
    HI Avishm,

    I have disabled the et-0/0/24 and et-1/0/24.But receiving same log messages.

    lab@MRV-AS-R03-DS-01# show virtual-chassis status
    Preprovisioned Virtual Chassis
    Virtual Chassis ID: aa9a.93a8.8422
    Virtual Chassis Mode: Enabled
    Mstr Mixed Route Neighbor List
    Member ID    Status                   Serial No                 Model             prio              Role         Mode   Mode ID          Interface
    0 (FPC 0)           Prsnt         TC3721160238      ex4600-40f      129      Master* N        VC           1             vcp-255/0/22
                                                                                                                                                                                                     1             vcp-255/0/23
    1 (FPC 1)           Prsnt         TC3721160449       ex4600-40f     129        Backup N         VC          0             vcp-255/0/22
                                                                                                                                                                                                     0              vcp-255/0/23

    ------------------------------
    NAVEEN M
    ------------------------------



  • 4.  RE: EX-4600 unconnected uplink interface showing error.

     
    Posted 11-15-2021 09:47
    Hi Naveen,

    As I mentioned, Port 24 in the log message is NOT the front panel port et-0/0/24 and et-1/0/24.

    Please share output of below command:

    switch> show virtual-chassis vc-port