This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

Swap Juniper

  • 1.  Swap Juniper

    Posted 07-30-2021 08:45
    Hi all,

    Please, who could help me? 
    I have this error

    XSTP : Interface ge-0/0/1 is not enabled for Ethernet Switching


  • 2.  RE: Swap Juniper

    Posted 07-30-2021 13:41
    Post that interface config and your spanning tree config.

  • 3.  RE: Swap Juniper

    Posted 08-02-2021 05:19
    If interface ge-0/0/1 has to be an access or trunk that runs STP over it, then enable Ethernet switching on the interface with set interfaces ge-0/0/1.0 family ethernet-switching command.