Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  L2circuit Local switching on QFX5110

    Posted 12-21-2020 00:10
      |   view attached

    Hi 

    I am setting up a local l2circuit on a QFX5110, I have the l2circuit up.

    But I am unable to pass traffic across it, on both ports I can get input traffic, but not Output

    Attached config, is there anything obvious I am missing?

    Thanks

    Attachment(s)

    txt
    L2circuit Local.txt   1 KB 1 version


  • 2.  RE: L2circuit Local switching on QFX5110

    Posted 12-23-2020 03:15

    hello

    l2circuit local switching is not supported on QFX5110. You can configure it, but it wont work.




  • 3.  RE: L2circuit Local switching on QFX5110

    Posted 12-23-2020 04:08

    Hi

    Is there an official link you know about that states that?

    It would be good to see if available, do you which products do support it?

    Thanks 




  • 4.  RE: L2circuit Local switching on QFX5110

    Posted 12-23-2020 06:23

    Hi,

    Please look at Juniper Path finder url.

    https://apps.juniper.net/home/qfx5110/features?swName=Junos%20OS&rel=20.3R1

    Thanks




  • 5.  RE: L2circuit Local switching on QFX5110

    Posted 01-04-2021 19:41
    Hi

    I did get confirmation from the Juniper EX/QFX support team.
    The QFX series devices do not support L2Circuit Local-switching.

    Thanks