I did get confirmation from the Juniper EX/QFX support team.
The QFX series devices do not support L2Circuit Local-switching.
Original Message:
Sent: 12-23-2020 06:23
From: Unknown User
Subject: L2circuit Local switching on QFX5110
Hi,
Please look at Juniper Path finder url.
https://apps.juniper.net/home/qfx5110/features?swName=Junos%20OS&rel=20.3R1
Thanks
Original Message:
Sent: 12-23-2020 04:07
From: Unknown User
Subject: L2circuit Local switching on QFX5110
Hi
Is there an official link you know about that states that?
It would be good to see if available, do you which products do support it?
Thanks
Original Message:
Sent: 12-23-2020 03:14
From: Unknown User
Subject: L2circuit Local switching on QFX5110
hello
l2circuit local switching is not supported on QFX5110. You can configure it, but it wont work.
Original Message:
Sent: 12-21-2020 00:09
From: Unknown User
Subject: L2circuit Local switching on QFX5110
Hi
I am setting up a local l2circuit on a QFX5110, I have the l2circuit up.
But I am unable to pass traffic across it, on both ports I can get input traffic, but not Output
Attached config, is there anything obvious I am missing?
Thanks