Switching

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Backup "request" configuration

  • 1.  Backup "request" configuration

    Posted 10-07-2021 09:31
    Hello,

    My question is about backup all "request" configuration 
    For example:
    In Ex3300 there are two ports xe-0/1/2 & xe-0/1/3 which by default are vc-port, I change port xe-0/1/2 to act as eth port
    Once I had power glitch and the switch returned to default configuration,
    I load to the switch  backup file, the problem was that port xe-0/1/2 also returned to default config and became to act as vc-port

    My question is, how can I backup all configuration from "request" ?
    request virtual-chassis vc-port ........ 

    Regards


    ------------------------------
    Rafi Shemesh
    ------------------------------