Hello Cagri,
> 192.168.80.1>>>>>>>192.168.1.15 ping is not OK?
Do you have configured a default route (0.0.0.0/0) on this CPE device with next hop 192.168.80.4? Without this route another subnet outside this 192.168.80 cannot be reached.
> Also there is no ping to 192.168.1.1(internet gateway) from 192.168.1.15.
Then it could be the case that your Internet uplink device is not working. As most probably 192.168.1.1 is in the same network as 192.168.1.15 (I assume this is a /24 network), this should work without any further route.
Additionally, if you want to make the EX2300 reachable from the internet, you have to configure a static route as well: set routing-options statice route 0.0.0.0/0 next-hop 192.168.1.1
Generally, without knowing details about your configuration, it is always a guess where the issue could be located.
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Accepted Solution".
If you think my answer helps, please spend some Kudos
------------------------------
Original Message:
Sent: 12-06-2020 15:14
From: CAGRI TUNCER
Subject: EX2300 switch routing issue
------------------------------
CAGRI TUNCER
------------------------------