The uplink ports labeled 2 and 3 (interfaces ge-0/1/2 and ge-0/1/3 or xe-0/1/2 and xe-0/1/3) are configured by default as VCPs on EX 3300. You can use these uplink ports to interconnect Virtual Chassis members. To use uplink ports 2 and 3 as network ports, you must configure them as network ports first.
------------------------------
ANKUR
------------------------------
Original Message:
Sent: 08-16-2021 09:21
From: Jean Claude Karemera
Subject: EX3300 not recognizing 2 sfp ports
hello team,
I have a juniper switch EX3300 with 4 SFP ports..... the first 2 (0 &1) ports are working fine but have an issue on ports (2&3).... the physical connection is up but as per the below screenshot... the ports are not recognized when issuing the below command
------------------------------
Jean Claude Karemera
------------------------------