Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



QinQ with 0x88a8 within VNI

  • 1.  QinQ with 0x88a8 within VNI

    Posted 01-20-2022 18:59
    I have a feature question regarding the QFX5100 switch. Asking as I haven't been able to find documentation or previous posts explicitly saying this will work.

    If I ingress traffic on an interface and push a 0x88a8 tag under existing QinQ (0x8100 in 0x8100) traffic coming in an interface, then map this outer 0x88a8 tag to a VXLAN VNI, will that work?
    i.e. can I use a VNI as a VLAN transparent tunnel for a customer, between a port each on three different switches?

    Also, does the same work with VPLS?

    Many thanks

    ------------------------------
    Matthew McTague
    ------------------------------