Hi,
In one of our lab, I have only one vlan available 10.33.45.0/24. I configured the vlan on all interfaces(almost), and also try to use the ip address inside this vlan for management access but failed.
Here is my config:
set vlans Lab vlan-id 345
set interfaces interface-range SCOPE member ge-0/0/[0-46]
set interfaces interface-range SCOPE unit 0 family ethernet-switching vlan members Lab
set interfaces vlan unit 345 family inet address 10.33.45.8/24
set routing-options static route 0.0.0.0/0 next-hop 10.33.45.1
set system services ssh
Every devices connecting port ge-0/0/[0-46] can communicate with other vlans outside of the lab, but I can't ping or ssh to 10.33.45.8.
I know if I have two vlans I can use the trunk:
set interfaces vlan unit 346 description NETMGMT-3
set interfaces vlan unit 346 family inet address 10.33.46.8/24
set vlans NETMGMT-3 vlan-id 346
set vlans NETMGMT-3 l3-interface vlan.346
But with only one vlan, what's my options here?
And one more question, which one is the management port here? Maybe I can use it to access the switch?
ge-0/1/0 {
unit 0 {
family ethernet-switching;
}
}
xe-0/1/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/1 {
unit 0 {
family ethernet-switching;
}
}
xe-0/1/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/2 {
unit 0 {
family ethernet-switching;
}
}
xe-0/1/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/3 {
unit 0 {
family ethernet-switching;
}
}
Thanks in advance for all your help!
------------------------------
KEITH GAO
------------------------------