Howdy. Is it possible to have RED tail drops on a non congested AE link. We have a cluster of EX4550 with an AE link to a MX PE router. The below output suggest RED drops on a 20G AE that is not congested. This is on the output queue towards the MX. We dont see any other link or physical issues as we have swapped the link and also the optics. The drops are seen on both member interfaces.
Interface: ae11, Enabled, Link is Up
Encapsulation: Ethernet, Speed: 20000mbps
Traffic statistics: Current delta
Input bytes: 39356980740060 (5229445888 bps) [10760491059]
Output bytes: 61840660176773 (9700835840 bps) [18059658838]
Input packets: 39467416568 (643979 pps) [10642756]
Output packets: 53397022640 (982784 pps) [15164634]
Error statistics:
Input errors: 0 [0]
Input drops: 0 [0]
Input framing errors: 0 [0]
Carrier transitions: 2 [0]
Output errors: 0 [0]
Output drops: 48981479 [26405]
Queue counters: Queued packets Transmitted packets Dropped packets
0 0 53433737407 49036582
1 0 0 0
5 0 0 0
7 0 1267216 0