Switching

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



getty repeating too quickly on port /dev/ttyu1 in messages

  • 1.  getty repeating too quickly on port /dev/ttyu1 in messages

    Posted 07-27-2021 08:45
    Good morning.
    I upgrade a 3400 from 20.1R1-S1  to 20.4 20.4R2-S1.6  this morning and I seen a lot of tty error logs after the reboot(136 lines in 50 minutes) .
    This could have been a fluke but   in case its not and is a odd artifact   as root do a kill -HUP 1 and that seemed to have addressed the issue.

    Jul 27 07:25:58 switch getty[17550]: %AUTH-3: login_tty /dev/ttyu1: Inappropriate ioctl for device
    Jul 27 07:25:58 switch init: %AUTH-1: getty repeating too quickly on port /dev/ttyu1, sleeping 30 secs

    at the shell as root
    switch:RE:0% kill -HUP 1

    PS
    I do have my auxiliary  com port
     auxiliary {
    log-out-on-disconnect;
    port-type mini-usb;
    }