Hi,
I have a cluster of two EX4300 switches and I would like to create a snapshots to USB (Junos 18.4R2-S5.4).
I tried to do this according following documentations:
Backing Up an Installation Using Snapshotsrequest system snapshotbut I have syntax error output when try to use 'usb' option:
user@hostname> request system snapshot media usb
^
syntax error.{master:0}
it is little strange for me because when I type '?' then the 'usb' option is available:
user@hostname> request system snapshot media ?
Possible completions:
external Write snapshot to external storage device
internal Write snapshot to internal flash
usb Write snapshot to device connected to USB port
I also tried another options but result is the same:
request system snapshot member 0 media usb
request system snapshot all-members media usb
request system snapshot partition media usb
Pendrive looks OK and meet requirements - it is a USB2.0, 4GB, FAT32:
Feb 10 13:05:09 hostname /kernel: da1 at umass-sim1 bus 1 target 0 lun 0
Feb 10 13:05:09 hostname /kernel: da1: <General UDisk 5.00> Removable Direct Access SCSI-2 device
Feb 10 13:05:09 hostname /kernel: da1: 40.000MB/s transfers
Feb 10 13:05:09 hostname /kernel: da1: 3840MB (7864320 512 byte sectors: 255H 63S/T 489C)
Could you advice something please?