This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

[ask] advertise speed limit in EX series

  • 1.  [ask] advertise speed limit in EX series

    Posted 04-26-2021 02:49
    i am using EX2300 with Junos 18.2R3
    it has 4 sfp+ 10Gbps.
    how do we speed limit only 2.5G for example.
    seems no command to set the speed in the current junos version
    any idea?


  • 2.  RE: [ask] advertise speed limit in EX series

    Posted 04-27-2021 08:07
    I upgrade Junos 15. then it work set class of service ge-0/0/1 shaping rate 30m.


  • 3.  RE: [ask] advertise speed limit in EX series

    Posted 04-27-2021 20:21
    I think you are asking about how to limit a 10 G interface to pass only 2.5 G of traffic.  If that is the case you can use policers in Junos for this function.  An example of interface policier configuration and application would be this documentation.


    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)