Hi,
i think it will be suitable for my scenario..
Configuration:
Site-A_PC 1:
set interfaces xe-0/1/0 unit 0 family ethernet-switching vlan members test
set interfaces vlan unit 10 family inet address 1.1.1.1/24
Site-B_PC 2:
set interfaces xe-0/1/6 unit 0 family ethernet-switching vlan members test
set interfaces vlan unit 10 family inet address 1.1.1.2/24
Ex4200_1_Site-A:
set protocols iccp local-ip-addr 2.3.4.1
set protocols iccp peer 2.3.4.2 liveness-detection minimum-receive-interval 60
set protocols iccp peer 2.3.4.2 liveness-detection transmit-interval minimum-interval 60
set multi-chassis multi-chassis-protection 2.3.4.1 interface ae0
set chassis aggregated-devices ethernet device-count 2
set interfaces et-0/0/1 ether-options 802.3ad ae1
set interfaces et-0/0/0 ether-options 802.3ad ae0
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members all
set interfaces ae1 aggregated-ether-options lacp active
set interfaces ae1 aggregated-ether-options lacp system-id 00:00:00:00:00:10
set interfaces ae1 aggregated-ether-options lacp admin-key 1
set interfaces ae1 aggregated-ether-options mc-ae mc-ae-id 1
set interfaces ae1 aggregated-ether-options mc-ae chassis-id 1
set interfaces ae1 aggregated-ether-options mc-ae mode active-active
set interfaces ae1 aggregated-ether-options mc-ae status-control active
set interfaces ae1 aggregated-ether-options mc-ae init-delay-time 240
set interfaces ae1 unit 0 family ethernet-switching vlan members test
set interfaces xe-0/0/4:0 unit 0 family ethernet-switching vlan members test
set interfaces irb unit 0 family inet address 2.3.4.1/24
set vlans default vlan-id 1
set vlans default l3-interface irb.0
set vlans test vlan-id 10
Ex4200_2_Site-A:
set protocols iccp local-ip-addr 2.3.4.2
set protocols iccp peer 2.3.4.1 liveness-detection minimum-receive-interval 60
set protocols iccp peer 2.3.4.1 liveness-detection transmit-interval minimum-interval 60
set multi-chassis multi-chassis-protection 2.3.4.2 interface ae0
set chassis aggregated-devices ethernet device-count 2
set interfaces et-0/0/0 ether-options 802.3ad ae0
set interfaces et-0/0/1 ether-options 802.3ad ae1
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members all
set interfaces ae1 aggregated-ether-options lacp active
set interfaces ae1 aggregated-ether-options lacp system-id 00:00:00:00:00:10
set interfaces ae1 aggregated-ether-options lacp admin-key 1
set interfaces ae1 aggregated-ether-options mc-ae mc-ae-id 1
set interfaces ae1 aggregated-ether-options mc-ae chassis-id 0
set interfaces ae1 aggregated-ether-options mc-ae mode active-active
set interfaces ae1 aggregated-ether-options mc-ae status-control standby
set interfaces ae1 aggregated-ether-options mc-ae init-delay-time 240
set interfaces ae1 unit 0 family ethernet-switching vlan members test
set vlans default vlan-id 1
set vlans default l3-interface irb.0
set vlans test vlan-id 10
set vlans vlan500 vlan-id 500
set interfaces irb unit 0 family inet address 2.3.4.2/24
Ex400_1_Site-B:
set protocols iccp local-ip-addr 1.2.3.1
set protocols iccp peer 1.2.3.2 liveness-detection minimum-receive-interval 60
set protocols iccp peer 1.2.3.2 liveness-detection transmit-interval minimum-interval 60
set chassis aggregated-devices ethernet device-count 2
set interfaces et-0/0/48 ether-options 802.3ad ae1
set interfaces et-0/0/52 ether-options 802.3ad ae0
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members all
set interfaces ae1 aggregated-ether-options lacp active
set interfaces ae1 aggregated-ether-options lacp system-id 00:00:00:00:00:11
set interfaces ae1 aggregated-ether-options lacp admin-key 2
set interfaces ae1 aggregated-ether-options mc-ae mc-ae-id 1
set interfaces ae1 aggregated-ether-options mc-ae chassis-id 0
set interfaces ae1 aggregated-ether-options mc-ae mode active-active
set interfaces ae1 aggregated-ether-options mc-ae status-control active
set interfaces ae1 aggregated-ether-options mc-ae init-delay-time 240
set interfaces ae1 unit 0 family ethernet-switching vlan members test
set interfaces irb unit 0 family inet address 1.2.3.1/24
set vlans default vlan-id 1
set vlans default l3-interface irb.0
set vlans test vlan-id 10
set vlans vlan500 vlan-id 500
Ex4200_2_Site-B:
set protocols iccp local-ip-addr 1.2.3.2
set protocols iccp peer 1.2.3.1 liveness-detection minimum-receive-interval 60
set protocols iccp peer 1.2.3.1 liveness-detection transmit-interval minimum-interval 60
set multi-chassis multi-chassis-protection 1.2.3.2 interface ae0
set chassis aggregated-devices ethernet device-count 2
set interfaces et-0/0/96 ether-options 802.3ad ae1
set interfaces et-0/0/97 ether-options 802.3ad ae0
set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae0 unit 0 family ethernet-switching vlan members all
set interfaces ae1 aggregated-ether-options lacp passive
set interfaces ae1 aggregated-ether-options lacp system-id 00:00:00:00:00:11
set interfaces ae1 aggregated-ether-options lacp admin-key 2
set interfaces ae1 aggregated-ether-options mc-ae mc-ae-id 1
set interfaces ae1 aggregated-ether-options mc-ae chassis-id 1
set interfaces ae1 aggregated-ether-options mc-ae mode active-active
set interfaces ae1 aggregated-ether-options mc-ae status-control standby
set interfaces ae1 aggregated-ether-options mc-ae init-delay-time 240
set interfaces ae1 unit 0 family ethernet-switching vlan members test
set interfaces xe-0/0/0 unit 0 family ethernet-switching vlan members test
set interfaces irb unit 0 family inet address 1.2.3.2/24
set vlans default vlan-id 1
set vlans default l3-interface irb.0
set vlans test vlan-id 10
set vlans vlan500 vlan-id 500
------------------------------
Umesh Sharma
------------------------------
Original Message:
Sent: 12-17-2020 04:08
From: Umesh Sharma
Subject: MC-LAG configuration step by step ex4200
Thanks a lots for your reply..
and i want to make below scenario..
if possible please share the URL for it.
Thanks in advance..
Regards..
Umesh Sharma | 91 9007743324
------------------------------
Umesh Sharma
Original Message:
Sent: 12-17-2020 02:13
From: Unknown User
Subject: MC-LAG configuration step by step ex4200
The EX4200 is not capable of MC-LAG operation. It can however connect to two MC-LAG peers as a client with a standard LACP aggregated ethernet interface.
set chassis aggregated-devices ethernet device-count 1
set interfaces xe-0/1/0 ether-options 802.3ad ae0
set interfaces xe-1/1/0 ether-options 802.3ad ae0
set interfaces ae0 aggregated-ether-options lacp active periodic fast
set interfaces ae0 unit 0 family ethernet-switching port-mode trunk