Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Drops on Virtual Chassis Fabric vcp ports

    Posted 12-10-2021 05:39
    Hello community:

    I have a VCF with sixteen members, 2 spines and 14 leaves. I am watching input drops on VCP port of a leaf thats is connected to a spine, any idea why I am having this drops on this interface?

    {linecard:3}
    root@VCF_1> show interfaces extensive vcp-255/0/4* | match drops
    Errors: 0, Drops: 105116511, Framing errors: 0, Runts: 0, Giants: 0, Bucket drops: 0, Policed discards: 0, Resource errors: 0
    Carrier transitions: 0, Errors: 0, Drops: 0, MTU errors: 0, Resource errors: 0, Bucket drops: 0
    Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Giants: 0, Bucket drops: 0, Policed discards: 0, Resource errors: 0
    Carrier transitions: 0, Errors: 0, Drops: 0, MTU errors: 0, Resource errors: 0, Bucket drops: 0

    Best regards

    Karlink


  • 2.  RE: Drops on Virtual Chassis Fabric vcp ports

    Posted 12-17-2021 14:18
    Any idea?


  • 3.  RE: Drops on Virtual Chassis Fabric vcp ports

     
    Posted 12-17-2021 16:48
    Well in the absence of any port errors or policing actions it's most likely interface saturation. Is the number increasing? Are you monitoring interface throughput?