Dear all
Could you help me with vxlan configuration between two qfx5100
I have made the following configuration
routing@qfx100# show interfaces ge-0/0/45
description MT100link;
vlan-tagging;
mtu 9216;
encapsulation flexible-ethernet-services;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members vlan101-102;
}
}
}
routing@qfx100# show protocols l2-learning
decapsulate-accept-inner-vlan;
routing@qfx100# show protocols l2-learning
vlan101-102 {
description VxLAN-TEST;
vlan-id-list 101-102;
vxlan {
vni 1001;
encapsulate-inner-vlan;
ingress-node-replication;
}
}
routing@qfx100# show switch-options
vtep-source-interface lo0.0;
remote-vtep-list 172.17.188.2;
The other side switch is configured the same way. But only 101 VLAN works. VLAN 102 does not work. When I try only 102 it works.
also, I saw that when I am setting VLAN members on the interface it tells me that vlan101-102 is untag
Could someone help me with this?
thanks