Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Configuration File Help - EX3300 will not load config - identical address found on multiple private or public interfaces error: configuration check-out failed

  • 1.  Configuration File Help - EX3300 will not load config - identical address found on multiple private or public interfaces error: configuration check-out failed

    Posted 12-13-2021 18:43
    Hello all,

    As the Subject states: on upgrading 15.1R5 to 15.1R6 & R7

    My EX3300 switch refuses to fully load the config file. It is completely functional otherwise.

    I receive the following when validating my config file:
    root@OSW> ...iguration /config/rescue.conf.gz
    [edit interfaces vlan unit 0 family inet]
    'address X.X.X.9/24'
    identical address found on multiple private or public interfaces
    error: configuration check-out failed

    I believe once I get this working the entire switch should return to normal. Worse case I roll back to 15.1R5.

    Here is my config file:
    root@OSW> show configuration
    ## Last commit: 2021-12-10 07:03:20 UTC by root
    version 15.1R7.9;
    system {
    host-name OSW;
    root-authentication {
    encrypted-password --------------------------------------
    }
    login {
    message "\n\n\n-Login Message-.\n\n\n";
    }
    services {
    ssh;
    }
    syslog {
    user * {
    any emergency;
    }
    file messages {
    any notice;
    authorization info;
    }
    file interactive-commands {
    interactive-commands any;
    }
    }
    }
    interfaces {
    ge-0/0/0 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/1 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/2 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/3 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/4 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/5 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/6 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/7 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/8 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/9 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/10 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/11 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/12 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/13 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/14 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/15 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/16 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/17 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/18 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/19 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/20 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/21 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/22 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/23 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/24 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/25 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/26 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/27 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/28 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/29 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/30 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/31 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/32 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/33 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/34 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/35 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/36 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/37 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/38 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/39 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/40 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/41 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/42 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/43 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/44 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/45 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/46 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/0/47 {
    disable;
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/1/0 {
    unit 0 {
    family ethernet-switching;
    }
    }
    xe-0/1/0 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/1/1 {
    unit 0 {
    family ethernet-switching;
    }
    }
    xe-0/1/1 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/1/2 {
    unit 0 {
    family ethernet-switching;
    }
    }
    xe-0/1/2 {
    unit 0 {
    family ethernet-switching;
    }
    }
    ge-0/1/3 {
    unit 0 {
    family ethernet-switching;
    }
    }
    xe-0/1/3 {
    unit 0 {
    family ethernet-switching;
    }
    }
    me0 {
    unit 0 {
    family inet {
    address X.X.X.9/24;
    }
    }
    }
    vlan {
    unit 0 {
    family inet {
    address X.X.X.9/24;
    }
    }
    }
    }
    protocols {
    igmp-snooping {
    vlan all;
    }
    rstp;
    lldp {
    interface all;
    }
    lldp-med {
    interface all;
    }
    }
    ethernet-switching-options {
    storm-control {
    interface all;
    }
    }
    poe {
    interface all;
    }

    What did I do wrong? how can I fix this? To where the switch accepts the configuration? Basically it is set up to where all the interfaces use the X.X.X.9/24 IP.

    ------------------------------
    OWEN O'HARE
    ------------------------------

    -X-X-X-X-X-X-X-X-X-X-X-X-X-UPDATE-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-


    Fixed the issue.

    I started at 12.3
    and finished at 15.1R7-S11

    To get to 15.1R7.9 YOU must first:
    12.3 -go to -> 15.1R1
    then manual upgrade to:
    R2
    R3
    R4
    R5

    @ 15.1R6 The firmware OS will change just enough so that it will not read your config file (this happened to me)

    To fix:

    I had to backup all configurations, IPs, etc...
    Load the new firmware in this case 15.1R7.9
    Factory RESET! (I zeroized it) - This blew away everything yet keeps the switch at the last firmware you loaded (in this case 15.1R7.9)
    Then reconfigure with the ezsetup

    This allowed the switch to regenerate a new config file with ezsetup I could enter in all my specific configurations into.

    This worked. I am now fully patched witht the latest and greatest to include the Junos SRs (security Releases)



    NOTE
    To do this you must be root - "god" mode
    Have a serial/console cable on hand

    See juniper KBs on factory reset