Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Unable to enter Edit/Configure Mode on EX 3300

    Posted 12-01-2021 17:13
    For some reason i cannot enter edit/configure mode  on EX3300. This is a standalone switch with no VC configured. When Edit or Configure is type the device errors out . 

    root@LABSW> edit ^
    missing argument.

    error: session failure: unexpected termination
    error: remote side unexpectedly closed connection
    root@LABSW:RE:0%

    root@LABSW:RE:0% cli
    {master:0}
    root@LABSW> configure  ^
    missing argument.

    error: session failure: unexpected termination
    error: remote side unexpectedly closed connection
    root@AMPCUS-LABSW:RE:0%

    Any insight how to resolve this?

    ------------------------------
    ANKUR
    ------------------------------


  • 2.  RE: Unable to enter Edit/Configure Mode on EX 3300

     
    Posted 12-02-2021 05:47
    Looks like the configuration was added to force particular configure modes must be used thus preventing normal multi user configuration mode. 

    The options are

    configure private
    configure exclusive

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------