Switching

 View Only
last person joined: 20 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

  • 1.  qfx5100 error log

    Posted 11-11-2018 04:51

    Hi

    I saw errors in the logs

     

    Nov 11 14:23:17 sw_QFX fpc0 Error in: SBUS transaction.
    Nov 11 14:23:17 sw_QFX fpc0 Blk: 1, Pipe: 1, Address: 0x2410105c, base: 0x4, stage: 9, index: 4188
    Nov 11 14:23:17 sw_QFX fpc0 Unit 0: mem: 2095=L3_ENTRY_IPV4_UNICAST blkoffset:10
    Nov 11 14:23:17 sw_QFX fpc0 Unit 0: _soc_ser_overlay_mem_correction: mem write L3_ENTRY_ONLY.ipipe0[4188] failed: Operation failed
    Nov 11 14:23:17 sw_QFX fpc0 Unit: 0
    Nov 11 14:23:17 sw_QFX fpc0 Mem:
    Nov 11 14:23:17 sw_QFX fpc0 Parity error..
    Nov 11 14:23:17 sw_QFX fpc0 Error in: SBUS transaction.
    Nov 11 14:23:17 sw_QFX fpc0 Blk: 1, Pipe: 1, Address: 0x2410105c, base: 0x4, stage: 9, index: 4188
    Nov 11 14:23:17 sw_QFX fpc0 Unit 0: mem: 2095=L3_ENTRY_IPV4_UNICAST blkoffset:10
    Nov 11 14:23:17 sw_QFX fpc0 Unit 0: _soc_ser_overlay_mem_correction: mem write L3_ENTRY_ONLY.ipipe0[4188] failed: Operation failed

     

    the switch is working normally

    What is the cause of errors?
    thank

     



  • 2.  RE: qfx5100 error log

     
    Posted 11-11-2018 05:33

    Hi,

     

    You can read the below PR.

     

    https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1364657

     

    Regards
    Rahul