Switching

Expand all | Collapse all

Juniper equivalent command

Jump to Best Answer
  • 1.  Juniper equivalent command

    Posted 09-25-2019 00:08
    Good day, Is there a juniper equivalent command for this Cisco command " mpls label range " .


  • 2.  RE: Juniper equivalent command
    Best Answer

     
    Posted 09-25-2019 01:24

    Hello,

     

    Please check if the following command is what you're after (I'm using 19.3R1):

    [edit]
    user@mx# set protocols mpls label-range ?
    Possible completions:
    + apply-groups         Groups from which to inherit configuration data
    + apply-groups-except  Don't inherit configuration data from these groups
    > block-label-range    Block-label-range
    > dynamic-label-range  Dynamic-label-range
      label-limit          Limit for the number of concurrent active labels (0..1048575)
    > lsi-label-range      LSI-label-range
    > srgb-label-range     SRGB-label-range
    > static-label-range   Static-label-range

    Best regards,

    Sergii

    -------------------------------------------------------------------

    Please accept the solution if your problem is resolved Smiley Happy

    -------------------------------------------------------------------