Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 07-19-2018 03:47

    Hello

    Has anyone had this issue.  when I install vQFX-PFE on EVE-NG, the local console password doesnt allow me to login.

    I used "root" "root"

     



  • 2.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 07-19-2018 04:50

    The RE vm will drop us to the Junos prompt, like we’re used to. The only way to really tell that the PFE is fully loaded, is to login with “root/Juniper”,

     

    or try root wothout a password which is the default on many other junos devices

     

    regards

     

    alexander



  • 3.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 07-23-2018 10:05

    Hi.

     

    The console credentials for vQFX PFE VM are "root/no".

     

    Agree with Alexander. The only way how to check that vQFX PFE VM is fully loaded is from CLI of vQFX RE VM (e.g. show chassis fpc). Default credentials for RE VM are those provided by Alexander  - "root/Juniper".

     

     



  • 4.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 01-22-2022 05:45
    Hi,

    I am able to login using "root/no" (as shown below).  But how do I get the actual login prompt for the switch?


    ------------------------------
    KENNETH GOH
    ------------------------------



  • 5.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

     
    Posted 01-22-2022 05:47
    The root login puts you on the shell of the device.  Enter junos by the command cli

    cli

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 6.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 01-23-2022 05:39
    It prompted command not found


    ------------------------------
    KENNETH GOH
    ------------------------------



  • 7.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

     
    Posted 01-23-2022 05:50
    This means the system is not fully loaded then and there is a problem with the install, vm file or the load process itself.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 8.  RE: vQFX- PFE Wind River Linux 6.0.21 localhost console password

    Posted 01-23-2022 12:49
    Hi Kenneth,

    You console the wrong image. U should console the RE not PFE.

    Thanks