Switching

Hi!

I've noticed that an ex3300 is not having any shutdown temperature set:

root@juniper> show chassis temperature-thresholds 
                           Fan speed      Yellow alarm      Red alarm      Fire Shutdown
                          (degrees C)      (degrees C)     (degrees C)      (degrees C)
Item                     Normal  High   Normal  Bad fan   Normal  Bad fan     Normal
FPC 0 CPU                    60    70       80       70       95       85
FPC 0 EX-PFE1                60    70       80       70       95       85
FPC 0 GEPHY1                 60    70       80       70       95       85
FPC 0 Fan Exhaust            60    70       80       70       95       85
FPC 0 SFP+ PHY               60    70       80       70       95       85
FPC 0 Local Sensor           60    70       80       70       95       85

{master:0}

How can I set the shutdown temperature? I don't have any temperature issues, just to be on the safe side and have an automatic shutdown in case things go south.

Best Regards J

Hello J,

please check if this article solves your question:

https://forums.juniper.net/t5/Ethernet-Switching/changing-temperature-thresholds-on-EX-switch/td-p/292470

Hi

For general recommendation i dont think it is recommended to change the temperature threshold. However in this case you are not seeing the fire shutdown threshold. 

So you may try the following

set chassis temperature-threshold fire-shutdown <temperature>

This is hidden command so you may have to type it completely.

---

@josha wrote:

Hi!

I've noticed that an ex3300 is not having any shutdown temperature set:

 

root@juniper> show chassis temperature-thresholds 
                           Fan speed      Yellow alarm      Red alarm      Fire Shutdown
                          (degrees C)      (degrees C)     (degrees C)      (degrees C)
Item                     Normal  High   Normal  Bad fan   Normal  Bad fan     Normal
FPC 0 CPU                    60    70       80       70       95       85
FPC 0 EX-PFE1                60    70       80       70       95       85
FPC 0 GEPHY1                 60    70       80       70       95       85
FPC 0 Fan Exhaust            60    70       80       70       95       85
FPC 0 SFP+ PHY               60    70       80       70       95       85
FPC 0 Local Sensor           60    70       80       70       95       85

{master:0}

How can I set the shutdown temperature? I don't have any temperature issues, just to be on the safe side and have an automatic shutdown in case things go south.

 

Best Regards J

---

---

@josha wrote:

Hi!

I've noticed that an ex3300 is not having any shutdown temperature set:

 

root@juniper> show chassis temperature-thresholds 
                           Fan speed      Yellow alarm      Red alarm      Fire Shutdown
                          (degrees C)      (degrees C)     (degrees C)      (degrees C)
Item                     Normal  High   Normal  Bad fan   Normal  Bad fan     Normal
FPC 0 CPU                    60    70       80       70       95       85
FPC 0 EX-PFE1                60    70       80       70       95       85
FPC 0 GEPHY1                 60    70       80       70       95       85
FPC 0 Fan Exhaust            60    70       80       70       95       85
FPC 0 SFP+ PHY               60    70       80       70       95       85
FPC 0 Local Sensor           60    70       80       70       95       85

{master:0}

How can I set the shutdown temperature? I don't have any temperature issues, just to be on the safe side and have an automatic shutdown in case things go south.

 

Best Regards J

---

Thanks, this was what I was thinking, it's not even set. I will try it out, thanks.

I'm glad that I was able to help you. Please mark my post as "Accepted Solution", so that others can find the answer quickly. Kudos are appreciated as well.