Switching

Expand all | Collapse all

EX2200 LACP Trunk to Brocade ping problem

Jump to Best Answer
  • 1.  EX2200 LACP Trunk to Brocade ping problem

    Posted 08-01-2018 20:34

    Hi

     

    2018-08-02 10_12_43-EVE _ Topology - Opera.png

     

    PROBLEMS
    1. EX2200 can't ping Brocade ip

    I create trunk lacp between Juniper EX2200 and Brocade FCX648S

    My problem was I can't ping from Juniper to Brocade and vice versa, but Brocade can ping Cisco or Gateway

    What's wrong with my Juniper config?

    tq

     

    BROCADE
    #show running-config
    Current configuration:
    ver 08.0.30sT7f3
    stack unit 1
      module 1 fcx-48-port-management-module
      module 2 fcx-cx4-2-port-16g-module
    !
    lag CISCO dynamic id 1
    ports ethernet 1/1/47 to 1/1/48
    primary-port 1/1/47
    lacp-timeout short
    deploy
    !
    lag JUNIPER dynamic id 2
    ports ethernet 1/1/1 to 1/1/2
    primary-port 1/1/1
    deploy
    !
    vlan 1 name DEFAULT-VLAN by port
    router-interface ve 1
    !
    vlan 10 name WAN1 by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 10
    !
    vlan 20 name DMZ by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 20
    !
    vlan 30 name SVR by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 30
    !
    vlan 40 name USR by port
    tagged ethe 1/1/47 to 1/1/48
    untagged ethe 1/1/25
    router-interface ve 40
    !
    vlan 50 name VOICE by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 50
    !
    vlan 60 name GUEST by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 60
    !
    vlan 80 name HA by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 80
    !
    vlan 88 name WAN2 by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 88
    !
    vlan 90 name STR by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 90
    !
    vlan 100 name MGMT by port
    tagged ethe 1/1/47 to 1/1/48
    router-interface ve 100
    aaa authentication web-server default local
    aaa authentication enable default local
    aaa authentication login default local
    aaa authentication login privilege-mode
    boot sys fl sec
    boot sys fl pri
    chassis name FCX01
    jumbo
    enable super-user-password .....
    enable port-config-password .....
    enable read-only-password .....
    enable aaa console
    enable acl-per-port-per-vlan
    hostname SWFCX648S
    ip ssl cert-key-size 2048
    ip dns domain-list ngtrain.com
    ip dns server-address 8.8.8.8 9.9.9.9
    ip route 0.0.0.0/0 10.0.10.1
    no telnet server
    username admin2 password .....
    username admin1 password .....
    clock timezone gmt GMT+07
    ntp
    server 103.31.225.225
    web-management https
    banner motd ^C
    Do not disturb the setup ^C
    interface management 1
    no ip dhcp-client enable
    interface ve 1
    interface ve 10
    ip address 10.0.10.216 255.255.255.0
    interface ve 20
    interface ve 30
    interface ve 40
    interface ve 50
    interface ve 60
    interface ve 80
    interface ve 88
    interface ve 90
    interface ve 100
    ip address 10.0.100.216 255.255.255.0
    ip ssh  authentication-retries 2
    ip ssh  timeout 30
    ip ssh  idle-time 30
    ip ssh  key-exchange-method dh-group14-sha1
    ip ssh  encryption disable-aes-cbc
    end
     
     
     
    JUNIPER
    # show
    ## Last changed: 2018-01-19 19:02:52 WIT
    version 15.1R6.7;
    system {
        time-zone Asia/Jakarta;
        root-authentication {
            encrypted-password "$1$WoekkUPE$BtBx7i5XNsWLfTDAfZ7tZ1"; ## SECRET-DATA
        }
        name-server {
            8.8.8.8;
            4.2.2.2;
        }
        services {
            ssh;
            dhcp {
                pool 10.0.10.0/24 {
                    address-range low 10.0.10.101 high 10.0.10.200;
                    router {
                        10.0.10.1;
                    }
                }
            }
        }
        syslog {
            user * {
                any emergency;
            }
            file messages {
                any notice;
                authorization info;
            }
            file interactive-commands {
                interactive-commands any;
            }
        }
        ntp;
    }
    chassis {
        aggregated-devices {
            ethernet {
                device-count 1;
            }
        }
        alarm {
            management-ethernet {
                link-down ignore;
            }
        }
    }
        ge-0/1/2 {
            ether-options {
                802.3ad ae0;
            }
        }
        ge-0/1/3 {
            ether-options {
                802.3ad ae0;
            }
        }
        ae0 {
            aggregated-ether-options {
                minimum-links 1;
                lacp {
                    active;
                }
            }
            unit 0 {
                family ethernet-switching {
                    port-mode trunk;
                    vlan {
                        members [ WAN1 WAN2 DMZ SVR USR VOICE GUEST HA STR MGMT ];
                    }
                    native-vlan-id default;
                }
            }
        }
        vlan {
            unit 0 {
                family inet;
            }
            unit 10 {
                family inet {
                    address 10.0.10.213/24;
                }
            }
        }
    }
    routing-options {
        static {
            route 0.0.0.0/0 next-hop 10.0.10.1;
        }
    }
    protocols {
        igmp-snooping {
            vlan all;
        }
        rstp;
        lldp {
            interface all;
        }
        lldp-med {
            interface all;
        }
    }
    ethernet-switching-options {
        storm-control {
            interface all;
        }
    }
    vlans {
        DMZ {
            vlan-id 20;
        }
        GUEST {
            vlan-id 60;
        }
        HA {
            vlan-id 80;
        }
        MGMT {
            vlan-id 100;
        }
        STR {
            vlan-id 90;
        }
        SVR {
            vlan-id 30;
        }
        USR {
            vlan-id 40;
        }
        VOICE {
            vlan-id 50;
        }
        WAN1 {
            vlan-id 10;
            l3-interface vlan.10;
        }
        WAN2 {
            vlan-id 88;
        }
        default {
            l3-interface vlan.0;
        }
    }
     
     
    # run show lacp interfaces
    Aggregated interface: ae0
        LACP state:       Role   Exp   Def  Dist  Col  Syn  Aggr  Timeout  Activity
          ge-0/1/2       Actor    No    No   Yes  Yes  Yes   Yes     Fast    Active
          ge-0/1/2     Partner    No    No   Yes  Yes  Yes   Yes     Slow    Active
          ge-0/1/3       Actor    No    No   Yes  Yes  Yes   Yes     Fast    Active
          ge-0/1/3     Partner    No    No   Yes  Yes  Yes   Yes     Slow    Active
        LACP protocol:        Receive State  Transmit State          Mux State
          ge-0/1/2                  Current   Slow periodic Collecting distributing
          ge-0/1/3                  Current   Slow periodic Collecting distributing
     
    # run show ethernet-switching interfaces
    Interface    State  VLAN members        Tag   Tagging  Blocking
    ae0.0        up     DMZ                 20    tagged   unblocked
                        GUEST               60    tagged   unblocked
                        HA                  80    tagged   unblocked
                        MGMT                100   tagged   unblocked
                        STR                 90    tagged   unblocked
                        SVR                 30    tagged   unblocked
                        USR                 40    tagged   unblocked
                        VOICE               50    tagged   unblocked
                        WAN1                10    tagged   unblocked
                        WAN2                88    tagged   unblocked
     
    # run show interfaces brief ae0
    Physical interface: ae0, Enabled, Physical link is Up
      Link-level type: Ethernet, MTU: 1514, Speed: 2Gbps, Loopback: Disabled,
      Source filtering: Disabled, Flow control: Disabled
      Device flags   : Present Running
      Interface flags: SNMP-Traps Internal: 0x4000
      Logical interface ae0.0
        Flags: Up SNMP-Traps 0x40004000 Encapsulation: ENET2
        eth-switch



  • 2.  RE: EX2200 LACP Trunk to Brocade ping problem
    Best Answer

    Posted 08-01-2018 23:21

    From my point of view (without being a Brocade specialist 😉 ) your Brocade switch haven't tagged vlan 10 on ethe 1/1/1 and ethe 1/1/2  towards the Juniper EX2200.

     

    vlan 10 name WAN1
    tagged ethe 1/1/1 to 1/1/2