Switching

Expand all | Collapse all

DHCP on EX2300-C?

  • 1.  DHCP on EX2300-C?

    Posted 05-25-2017 21:38

    Does Juniper have plans to add the feature of local dhcp server to their EX2300-C switch? It was present on the old EX2200-C. So its dissappoint to see its omission.



  • 2.  RE: DHCP on EX2300-C?

     
    Posted 05-25-2017 22:17

    Why do you think it is gone?

     

    root@2300c> show configuration system services
    ssh;
    dhcp-local-server {
        group test {
            interface irb.100;
        }
    }
    
    root@2300c> show chassis hardware
    Hardware inventory:
    Item             Version  Part number  Serial number     Description
    Chassis                                HV0000000000      EX2300-C-12P
    Pseudo CB 0
    Routing Engine 0          BUILTIN      BUILTIN           RE-EX2300C-12P
    FPC 0            REV 08   650-059984   HV0000000000      EX2300-C-12P
      CPU                     BUILTIN      BUILTIN           FPC CPU
      PIC 0          REV 08   BUILTIN      BUILTIN           12x10/100/1000 Base-T
      PIC 1          REV 08   650-059984   HV0000000000      2x10G SFP/SFP+
    Power Supply 0                                           JPSU-170W-AC
    


  • 3.  RE: DHCP on EX2300-C?

    Posted 05-26-2017 01:04

    When i view the config to verify, the device says the DHCP code block is disabled because it is unsupported in the EX2300-C. Then, according to this list, DHCP is available on the EX2300 but not the EX2300-C

    https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=1345&fn=DHCP+Server



  • 4.  RE: DHCP on EX2300-C?

    Posted 05-26-2017 01:23

    When i issue command "show configuration system services dhcp" it lists the config, preceeded by this header:
    ##
    ## Warning: configuration block ignored: unsupported platform (ex2300-c-12p)
    ##



  • 5.  RE: DHCP on EX2300-C?

    Posted 05-26-2017 02:50

    There are two configuration methods:
    https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/dhcp-server-cli.html
    and you wanna say they didn't work?



  • 6.  RE: DHCP on EX2300-C?

     
    Posted 05-26-2017 06:24

    Are you running a version older than 15.1X53-D50?



  • 7.  RE: DHCP on EX2300-C?

    Posted 05-31-2017 03:21

    We have the EX2300-C in production running fine with dhcp - you have to configure the "newer" Version.

     



  • 8.  RE: DHCP on EX2300-C?

    Posted 06-24-2017 14:40

    set system services dhcp-local-server group V16 interface irb.16
    set interfaces ge-0/0/6 unit 0 family ethernet-switching vlan members V16
    set interfaces ge-0/0/8 unit 0 family ethernet-switching vlan members V16
    set access address-assignment pool V16 family inet network 172.16.30.0/24
    set access address-assignment pool V16 family inet range V16-RANGE low 172.16.30.10
    set access address-assignment pool V16 family inet range V16-RANGE high 172.16.30.40
    set access address-assignment pool V16 family inet dhcp-attributes maximum-lease-time 36000
    set access address-assignment pool V16 family inet dhcp-attributes server-identifier 172.16.30.1
    set access address-assignment pool V16 family inet dhcp-attributes name-server 8.8.8.8
    set access address-assignment pool V16 family inet dhcp-attributes router 172.16.30.1
    set vlans V16 vlan-id 16
    set vlans V16 l3-interface irb.16



  • 9.  RE: DHCP on EX2300-C?

    Posted 04-03-2018 07:38

    Hi, what is the commands for DHCPv6 same manner.

     

    thanks in advance.