Master and Backup Routing-Engines is not fetching any outputs.
Customer performed format installation on both the REs.
During the boot process, chassis is recording below logs:
fdisk: invalid fdisk partition table found
Firmware Version: --- 03.04.00 ---
CPLD/FPGA image versions on the board:
GCBC FPGA = 05.04 | BTCPLD = 07
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
I2C read from EEPROM device 0x51 failed.
Is the I2C read is failing for the hard disk ?
I would like to learn on how to find which part of the chassis is 0X51.
From chassisd logs, I could see FPC0 and FPC15 online request is being rejected continuously.
Mar 8 06:59:00 socket = 36
Mar 8 06:59:01 <==Rcv FPC 0 FPC_READY, pipe 0x0x2556c00, reconnect:0, fpc_state:3, transition:2 rec_progress:0 fru_error:0, reason:0, issu_rec:0
Mar 8 06:59:01 LCC connection not online: Rejecting FPC online request
Mar 8 06:58:59 socket = 36
Mar 8 06:59:00 <==Rcv FPC 15 FPC_READY, pipe 0x0x2556d00, reconnect:0, fpc_state:3, transition:2 rec_progress:0 fru_error:0, reason:0, issu_rec:0
Mar 8 06:59:00 LCC connection not online: Rejecting FPC online request
Thanks in advance!