Switching

Hi, 

I am running 13.2X51-D35 on a EX-4300 switch, one edge port was shutdown because of BPDU guard, how do I recover it? document says "clear bpdu-error interface ", but this command is not available, not sure why such basic command was not maintained.

ex4300-32f> clear b
                                     ^
'b' is ambiguous.
Possible completions:
  bfd                  Clear Bidirectional Forwarding Detection information
  bgp                  Clear Border Gateway Protocol information
  bridge               Clear learned Layer 2 MAC address information
{master:0}

I figured this out, the new command is "clear error bpdu interface interface-name <>"

next question, how to configured the time-out value for BPDU guard disabled interface to bring itself up? it used to be under "ethernet-switch-options"

Timeout is configured under protocols layer2-control:

user@switch# set protocols layer2-control bpdu-block disable-timeout ?
Possible completions:
  <disable-timeout>    Disable timeout for BPDU Protect (10..3600 seconds)