After commiting my changes i get "configuration delivery succes" but then i log out and log back in and it comes back again "You have pending changes from previous commit".
When you get message "You have pending changes from previous commit", could you log into the device and get
"show | compare" output?
Sorry for the late reply and thank you for your response.
Yes I do get output it is showing basically the same thing twice. Which is the ssl certificate that I am trying to install.
Could you paste the output of "show|compare" to see what configuration rolls back post commit? and could you try to "commit full" and see if that helps?
Since you mentioned about SSL certificate, I assume you trying to access/setup secure web access? if yes, it could be that SSL certificate got messed up , and you will need to import it again to see if that helps.Try to import the PEM file again and delete services web-management, then re-configure everything back again to force reprogram the kernel and generate a new file now with ssh v2.///
Generating and installing the SSL certificate to be used for Secure Web Access for EX Series switchhttps://kb.juniper.net/InfoCenter/index?page=content&id=KB19726
Commit full worked on the first try. Now the SSL cert is good but I'm still getting "you have pending changes...."
You don't have to answer. just wondering why it wouldn't go with a regualr commit.