Switching

Expand all | Collapse all

ocx1100: start linux juniper but doesnt start junos

  • 1.  ocx1100: start linux juniper but doesnt start junos

    Posted 07-16-2016 11:04

    I can login in the linux shell, but I can't start junos, somebody knows how it start or commands to load it?

     


    GNU GRUB version 2.02~beta2+e4a1fe391

    +----------------------------------------------------------------------------+
    |*Juniper Linux |
    | Juniper Linux Debug |
    | Juniper-Linux-Recovery |
    | Go to ONIE Loader |
    +----------------------------------------------------------------------------+

    i8042: No controller found
    First Level Bootstrap using initramfs...
    sd 6:0:0:0: [sdb] No Caching mode page found
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sd 6:0:0:0: [sdb] No Caching mode page found
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sd 6:0:0:0: [sdb] No Caching mode page found
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Mounting boot device LABEL=LINUX-BOOT
    Unpacking initrd.cpio.gz ....
    774557 blocks
    Unmount boot device LABEL=LINUX-BOOT
    INIT: version 2.88 booting
    Starting udev
    running pre rc steps on Rangeley
    2 logical volume(s) in volume group "vg0_vjunos" now active
    Starting udev
    Starting Bootlog daemon: bootlogd.
    Populating dev cache
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    kernel.core_uses_pid = 0
    kernel.core_pattern = |/etc/init.d/zipcore.sh /var/tmp/corefiles/ %h.%e.%p.%t.core %e
    fs.suid_dumpable = 2
    vm.swappiness = 1
    vm.vfs_cache_pressure = 50
    Starting atd: OK
    INIT: Entering runlevel: 3
    Starting system message bus: dbus.
    Starting OpenBSD Secure Shell server: sshd
    done.
    Configuring network interfaces... done.
    Starting domain name service: named.
    Starting irqbalance: done
    Starting ntpd: done
    starting rsyslogd ... done
    Starting internet superserver: xinetd.
    * Starting virtualization library daemon: libvirtd
    no /usr/bin/dnsmasq found; none killed
    2016-07-16 06:39:22.164+0000: 983: info : libvirt version: 1.1.2
    2016-07-16 06:39:22.164+0000: 983: warning : virGetHostname:625 : getaddr[ ok ]ailed for 'dhcp-10-1-1-105': Name or service not known
    Starting crond: OK
    Instantiate I2C devices...
    i2c i2c-1: Failed to register i2c client pca9548 at 0x70 (-16)
    Bring up system as SNX60A0-486F (0x0011)
    /etc/rc3.d/S90rc.i2cinit: line 100: echo: write error: Invalid argument
    i2c i2c-4: Failed to register i2c client 24c128 at 0x56 (-16)
    /etc/rc3.d/S90rc.i2cinit: line 116: echo: write error: Invalid argument
    adt7470 12-002c: cannot read configuration register
    Instantiate GPIO devices...
    od: /sys/bus/i2c/devices/17-0056/eeprom: read error: Connection timed out
    Booting normal on Rangeley
    /root: 60.5 MiB (63457280 bytes) trimmed
    /var: 13.4 MiB (14073856 bytes) trimmed
    /app_disk: 1.9 MiB (1940480 bytes) trimmed
    od: /sys/bus/i2c/devices/17-0056/eeprom: read error: Connection timed out
    Executing application: pkg-app-junos
    Initializing JUNOS Host applications
    [ OK ] Application initialization.
    Stopping internet superserver: xinetd.
    Starting internet superserver: xinetd.
    net.ipv4.ip_forward = 1
    Stopping Bootlog daemon: bootlogd.
    Starting tcf-agent: OK

    Wind River Linux 6.0.0.21 dhcp-10-1-1-105 console

    dhcp-10-1-1-105 login: root
    Password:
    Last login: Sat Jul 16 05:51:23 UTC 2016 from 10.1.1.130 on pts/0
    root@dhcp-10-1-1-105:~#



  • 2.  RE: ocx1100: start linux juniper but doesnt start junos

    Posted 07-22-2016 09:56


  • 3.  RE: ocx1100: start linux juniper but doesnt start junos

     
    Posted 07-22-2016 20:15

    He's already in the shell, he's asking how to enter Juniper CLI. That done with the cli command.

     

    root@test:RE:0% cli

    {master:0}

    root@test>



  • 4.  RE: ocx1100: start linux juniper but doesnt start junos

    Posted 07-17-2019 02:54
    Does anybody know how to reset the root password.


  • 5.  RE: ocx1100: start linux juniper but doesnt start junos

     
    Posted 07-17-2019 03:03

    This procedure should work, please check: 

    https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/authentication-root-password-recovering-qfx-series.html

     

    If none works, try USB recovery to re-install Junos afresh, but you'll lose the config.

     

    Hope this helps.

    Regards,
    -r.

    --------------------------------------------------

    If this solves your problem, please mark this post as "Accepted Solution."
    Kudos are always appreciated :).