Hi,
Not sure if this is possible. I want to acheive the following. On my MX104 I have several customer sites handed over to me on different vlans from my provider. These sites needs to share the same subnet with the default gateway on the MX104.
"Vlan rewrite" option on the ge interface doesn't work as the MX won't allow me to translate two different vlans (vlan 100 and 200) to one (vlan 1000). Below is the basic configuration but it obviously doesn't work as there is no vlan translation/rewrite/swap in there. Anyone have any idea on how to acheive this? Please see the descibing picture attached.
irb {
unit 1000 {
family inet {
address 10.1.1.1/24;
}
}
}
bridge-domains {
VLAN_1000 {
vlan-id 1000;
routing-interface irb.1000;
}
}
interfaces {
ge-0/0/0 {
description "To PROVIDER";
flexible-vlan-tagging;
mtu 9192;
encapsulation flexible-ethernet-services;
unit 100 {
description "Customer ACME site 1";
family bridge {
interface-mode trunk;
vlan-id-list 100;
}
}
unit 200 {
description "Customer ACME site 2";
family bridge {
interface-mode trunk;
vlan-id-list 200;
}
}