Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  J6350 in HA with enhanced-switching help.

    Posted 06-07-2014 15:09

     

    I am using two J6350 routers in HA cluster. I would like to use enhanced-switching with my fpc in slot 4 (8-port 1Gbps card).

    Whenever I try to swith to enhanced-switching mode I get alarms and fpc becomes inaccessible.

     

    root@j01-pco# set groups node0 chassis fpc 4 pic 0 ethernet pic-mode enhanced-switching

    root@j01-pco# set groups node1 chassis fpc 4 pic 0 ethernet pic-mode enhanced-switching

     

    After commit I get:

     

    root@j01-pco> show system alarms
    node0:
    --------------------------------------------------------------------------
    1 alarms currently active
    Alarm time               Class  Description
    2014-06-07 22:02:44 UTC  Major  FPC 4 PIC 0 Failure

    node1:
    --------------------------------------------------------------------------
    1 alarms currently active
    Alarm time               Class  Description
    2014-06-07 22:19:27 UTC  Major  FPC 4 PIC 0 Failure

     

    Also when I disable cluster enhanced-switching works just fine.

    Am I missing something? Can I use enhanced-switching with HA cluster?

     

    Cheers,

     

    Ranko

     

     

     


    #J6350HAenhanced-switching


  • 2.  RE: J6350 in HA with enhanced-switching help.
    Best Answer

     
    Posted 06-08-2014 21:58

    Hello Ranko

     

    Switching is not supported in HA cluster scenario.

    It is supported only in standalone J-Series appliances.

     

    Regards,

    Raveen



  • 3.  RE: J6350 in HA with enhanced-switching help.

    Posted 06-09-2014 18:23

    Is ti possible to create brige with J6350 in HA confoguration using reth?

     

    Cheers,

     

    Ranko

     



  • 4.  RE: J6350 in HA with enhanced-switching help.

     
    Posted 06-10-2014 02:12

    Bridge: do you mean J-Series devices in transparent mode?

    If so, transparent mode isn't supported in J-Serires devices in a clustered environment.

     

    Regards,

    Raveen