Switching

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

    Posted 06-11-2013 07:06

    Hi all,

     

    we have an EX2200-24T which is failing to load JUNOS and going to the loader> prompt.

     

    I'm trying to re-install JUNOS through TFTP. I've added the options and can see the router make the tftp request on the server but then it fails with "cannot open package (error 60)".

     

     

    loader> set ipaddr=192.168.1.2
    loader> set netmask=255.255.255.0
    loader> set serverip=192.168.1.1

     

    loader> install --format tftp://192.168.1.1/jinstall-ex-2200-11.4R5.7-domestic-signed.tgz
    cannot open package (error 60)

     

     

    Does anyone know how to resolve this. I read that it could be to do with free disk space but I'm not sure how to check space or create some.

     

    Any help would be appreciated.

     

    Thanks,

    Chris

     



  • 2.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

    Posted 06-11-2013 10:08

    Hi,

     

    Have you tried different ways?

    Like upgrading using FTP (Filezilla) or USB?



  • 3.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

    Posted 11-16-2013 05:47

    It often happens that Junos installation at loader prompt create problem I have faced the situation many a times. After going through lot of documents about Junos and FreeBsd I have devised a procedure which works without any problem and 100 success rate

     

    view my earlier post on link ,,,http://forums.juniper.net/t5/Junos-and-Junosphere/EX-3200-4200-Switch-Recovery/m-p/178233

     

     

    It will surly resolve your issue

     

     

    Please mark this as accepted solution if it works for you

    A Kudos is good way for appreciation

     

    Kashif Nawaz

    JNCIP-Sec, JNCIS-Ent, JNCIS-Sec,JNCIA-Junos



  • 4.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

    Posted 11-18-2013 00:11

    Hi Kashif,

     

    thanks for your reply.

     

    Unfortunately I'm unable to try your procedure as we RMA’d the unit, following advice from Cisco TAC.



  • 5.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

    Posted 11-07-2019 10:49

    This didn't work.



  • 6.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

     
    Posted 11-07-2019 11:55

    What did not work, the RMA replacement?  BTW, Junos does not support tftp, FTP or SCP only - no completely unsecure protocols.



  • 7.  RE: EX2200 at Loader Prompt "cannot open package (error 60)" when trying to tftp

     
    Posted 06-02-2021 22:47
    Just want to share this KB to try out for this issue if someone stumbles upon this page:
    https://kb.juniper.net/InfoCenter/index?page=content&id=KB29113&cat=EX4300_1&actp=LIST

    Hope this helps.

    Regards,
    -r.

    --------------------------------------------------

    If this solves your problem, please mark this post as "Accepted Solution."
    Kudos are always appreciated :).