Expand all | Collapse all

alarms on ex2200

Jump to Best Answer
  • 1.  alarms on ex2200

    Posted 01-04-2013 13:38

    i have a few ex2200 where the red alarm light is illuminated.  i read that it can appear if the management link is not plugged in. i issued the following command:


    set chassis alarm management-ethernet link-down ignore.


    i commited the changes and the alarm light changed from red to amber. however if i run a:


    show chassis alarms command "No alarms currently acitve" on the switch.


    not sure how to locate what is causing the amber light and how to resolve the issue.


    any assistance would be greatly appreciated.


  • 2.  RE: alarms on ex2200
    Best Answer

    Posted 01-04-2013 14:41
    Set the rescue config

    Request system configuration rescue save

    From operational mode

  • 3.  RE: alarms on ex2200

    Posted 01-04-2013 18:56

    You can also use "show system alarms" to see what it is complaining about if nothing shows up in "show chassis alarms".



  • 4.  RE: alarms on ex2200

    Posted 01-07-2013 06:38

    perfect, both of those tips worked perfectly. thanks for your help.

  • 5.  RE: alarms on ex2200

    Posted 04-18-2017 08:56

    HI Guys!

    perfect solution.

    I will just like to add: 

    In a virtual chassis scenario, make sure you login to affected member and run the commands from their operational mode.

    Hope it helps!

  • 6.  RE: alarms on ex2200

    Posted 04-26-2017 21:58