Switching

Hi,

Kindly let us know how to resolve LED:SPD Alarm 01.

I am using ex 4200 switch and its LCD display giving the alarm "LED:SPD Alarm 01"

Kindly help me...

Regards,

Milan Verma

Hi

Please read:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17607
and

http://www.juniper.net/techpubs/en_US/junos10.2/topics/reference/command-summary/show-chassis-lcd.html

It appears that there is a SPEED alarm on your chassis.

Please send us this command:

show chassis lcd

Bye

There is no such thing as a "Speed Alarm." LED:SPD means the port LED's indicate port speed, and ALARM means a chassis or system alarm has been triggered. They are two separate messages.

Hello this is my sh chasis lcd output please help me how can I resolve this error.

Juniper-EX4200-1> show chassis lcd
Front panel contents for slot: 0
---------------------------------
LCD screen:
00:RE NF-Juniper
LED:SPD ALARM 03
LEDs status:
Alarms LED: Red
System LED: Green
Master LED: Green
Interface LED(ADM/SPD/DPX/POE)
-------------------------------------
ge-0/0/0 On:3 blinks per sec
ge-0/0/1 On:3 blinks per sec
ge-0/0/2 On:2 blinks per sec
ge-0/0/3 Off
ge-0/0/4 On:3 blinks per sec
ge-0/0/5 Off
ge-0/0/6 On:3 blinks per sec
ge-0/0/7 Off
ge-0/0/8 On:3 blinks per sec
ge-0/0/9 Off
ge-0/0/10 On:3 blinks per sec
ge-0/0/11 On:3 blinks per sec
ge-0/0/12 On:3 blinks per sec
ge-0/0/13 Off
ge-0/0/14 On:3 blinks per sec
ge-0/0/15 Off
ge-0/0/16 On:3 blinks per sec
ge-0/0/17 Off
ge-0/0/18 Off
ge-0/0/19 Off
ge-0/0/20 On:3 blinks per sec
ge-0/0/21 Off
ge-0/0/22 Off
ge-0/0/23 Off
ge-0/0/24 Off
ge-0/0/25 Off
ge-0/0/26 On:3 blinks per sec
ge-0/0/27 Off
ge-0/0/28 On:3 blinks per sec
ge-0/0/29 Off
ge-0/0/30 Off
ge-0/0/31 Off
ge-0/0/32 Off
ge-0/0/33 Off
ge-0/0/34 Off
ge-0/0/35 Off
ge-0/0/36 Off
ge-0/0/37 Off
ge-0/0/38 Off
ge-0/0/39 Off
ge-0/0/40 Off
ge-0/0/41 Off
ge-0/0/42 Off
ge-0/0/43 Off
ge-0/0/44 Off
ge-0/0/45 On:2 blinks per sec
ge-0/0/46 Off
ge-0/0/47 On:3 blinks per sec

ALARM 03 means you have 3 alarms. You will need to use show chassis alarms from the CLI to list them.

That is my output ?

Juniper-EX4200>

show chassis alarms 2 alarms currently active Alarm time Class Description

2018-04-27 22:15:16 UTC Major FPC 0 PEM 1 is not powered

2018-04-27 22:15:15 UTC Major Upgrade bank is empty or corrupted for FPC 0, please do standard upgrade sequence

For #1 you have a bad power supply or it's not plugged in.

For #2 you need to install/update the bootloader. This post has more information:

https://forums.juniper.net/t5/Junos/Upgrade-bank-is-empty-or-corrupted-for-FPC-0-please-do-standard/m-p/153884/highlight/true#M6404

Note that current bootloader firmware is now here:

https://webdownload.juniper.net/swdl/dl/secure/site/1/record/76682.html