I have two ex4600 that are running 18.4R3-S3 and I have activated the management routing-instance mgmt_junos.
I have got it to work with RADIUS and SNMP without any issues, but when I'm trying to add archival of configuration using "transfer-on-commit" I draw a blank.
There is a command that seemd to be promising:
set system archival configuration routing-instance mgmt_junos
But this seems to have no affect.
When ever I try to add the archival site the following command:
set system archival configuration archive-sites scp://networkEQ@172.xxx.xxx.xxx/ password "xxxx"
I get the following error message: "ssh: connect to host 172.xxx.xxx.xxx port 22: No route to host".
I'm able to ping the SCP server using "ping 172.xxx.xxx.xxx routing-instance mgmt_junos", so the routing is working as expected.
Have someone managed to get this to work?
The archival feature has (sadly) not been ported to support routing-instances.
Only way to make this work is to have the route leaked into inet.0 so a lookup for the destination can be done.
Alternately you need an external system which can connect to the IP in mgmt_junos and extract the configuration at regular intervals.
Thanks for the quick reply.So, the setting "system archive configuration routing-instance" basically doesn’t so anything then?So what would be my best strategy here? The reason I activated the "management-instance" was because I have these two switches setup in a MC-LAG using the vlan approach, and I wanted to separate the management from the ICL/ICCP traffic.Should I have gone the other way around instead? Put the ICL/ICCP in a separate routing-instance, or maybe better yet, put each of them in their own routing-instance?
Best regards,Johan Christensson