Hi,
I have configured the SRX300 to use VRRP in the LAN interfaces, but I am facing an issue where the routers are in the Active/Active. The LAN's interface is connected to Core Switch and I have connectivity between the routers (ping is OK).
The interface's ge-0/0/0 configuration is following:
Router-01
show configuration interfaces ge-0/0/0
unit 0 {
description "CNX LAN";
family inet {
address 172.16.3.201/25 {
vrrp-group 1 {
virtual-address 172.16.3.200;
priority 200;
preempt;
accept-data;
}
}
}
}
Router-02
show configuration interfaces ge-0/0/0
unit 0 {
description "CNX LAN";
family inet {
address 172.16.3.202/25 {
vrrp-group 1 {
virtual-address 172.16.3.200;
preempt;
accept-data;
}
}
}
}
These routers are configured in the packet-based mode and there are no security zones available.
My questions are:
Does the SRX300 support VRRP on the physical interfaces?
There is a specific configuration to apply in the SRX300 to enable VRRP on the physical interfaces?
Thanks,
TM
------------------------------
Thiago Morais
------------------------------