i solved the problem! the problem wasn't the interface type, but the few system resources that i gave to my virtual machine. i read the document about the system requirement for vSRX linked by Rsurana. i gave it one vCPU and 2GB ram memory. it wasn't enough.. currently my virtual machine has 2 vCPU, 4GB ram memory, and 8 e1000 network adapters. with these settings my virtual SRX works. for a simple gns3 lab these settings seems too heavy for me.. but, it's ok.. the important thing is that it works 🙂 thanks you guys!
.. First adaptor will automatically will get assigned to Fxp0 ,so you can add mutliple to adaptor for getting ge-0/0/x interfaces on the device..
now that my vSRX works, i can check my virtual interfaces, but where is my management interface? why i don't see it in the "show interfaces terse" output?
root@srx-headq-pr> show interfaces terse
Interface Admin Link Proto Local Remote
ge-0/0/0 up up
ge-0/0/0.0 up up inet 192.168.100.254/24
gr-0/0/0 up up
ip-0/0/0 up up
lsq-0/0/0 up up
lt-0/0/0 up up
mt-0/0/0 up up
sp-0/0/0 up up
sp-0/0/0.0 up up inet
inet6
sp-0/0/0.16383 up up inet 10.0.0.1 --> 10.0.0.16
10.0.0.6 --> 0/0
128.0.0.1 --> 128.0.1.16
128.0.0.6 --> 0/0
ge-0/0/1 up up
ge-0/0/1.0 up up inet 192.168.200.254/24
ge-0/0/2 up up
ge-0/0/2.0 up up inet 93.12.12.10/28
ge-0/0/3 up up
ge-0/0/3.0 up up
ge-0/0/4 up up
ge-0/0/5 up up
ge-0/0/6 up up
ge-0/0/7 up up
dsc up up
gre up up
ipip up up
irb up up
lo0 up up
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 10.0.0.1 --> 0/0
10.0.0.16 --> 0/0
128.0.0.1 --> 0/0
128.0.0.4 --> 0/0
128.0.1.16 --> 0/0
lo0.32768 up up
lsi up up
mtun up up
pimd up up
pime up up
pp0 up up
ppd0 up up
ppe0 up up
st0 up up
tap up up
vlan up down
root@srx-headq-pr>
root@srx-headq-pr>
root@srx-headq-pr>
root@srx-headq-pr>
root@srx-headq-pr> show chassis fpc pic-status
Slot 0 Online Virtual FPC
PIC 0 Online Virtual GE
root@srx-headq-pr>