vSRX

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

vSRX Troubleshooting

Jump to Best Answer
  • 1.  vSRX Troubleshooting

    Posted 10-26-2020 13:15

    Hi All

    I´m going to carry out some tests of the operation of the Rules and NATs in the vSRX and I need to know what commands I must execute and capture and to analyze in case there is any failure.

    TIA
    Cristian


    #vSRX


  • 2.  Re: vSRX Troubleshooting
    Best Answer

    Posted 10-27-2020 00:16

    Hi,

     

     

    U can use command below:

     

    1.) show security flow session summary

    2.) show security policy hit-count

     

     

    Thanks



  • 3.  Re: vSRX Troubleshooting

     
    Posted 10-27-2020 00:19

    Hi,

     

    have you been through the KBs linked at https://kb.juniper.net/InfoCenter/index?page=content&id=KB21922 ? Anything in particular missing?

     

    Regards

     

    Ulf