For some reason your message isn't showing up here but I got your message by email. I will take a look at those KB articles and see what I can do. Thank you.
v/r
------------------------------
Bruno Vic
------------------------------
Original Message:
Sent: 07-22-2021 04:46
From: Unknown User
Subject: SRX5400 SLA equivalent commands
Original Message:
Sent: 07-22-2021 00:32
From: Bruno Vic
Subject: SRX5400 SLA equivalent commands
What are RPM and event scripts? I am new to SRX. I've never touched one in my life up until now.
------------------------------
Bruno Vic
Original Message:
Sent: 07-21-2021 22:36
From: Unknown User
Subject: SRX5400 SLA equivalent commands
Hi,
Yes, That possible. U can check on RPM + event script.
Thanks
Original Message:
Sent: 07-21-2021 13:11
From: Bruno Vic
Subject: SRX5400 SLA equivalent commands
Good Morning, we are trying to configure a failover path without using weighted routes on the SRX5400 so that if one path isn't available routes can use another path dynamically without user intervention. Is that possible on the SRX5400?
v/r
BVIC
------------------------------
Bruno Vic
------------------------------
Hi,
To configure RPM on juniper srx, you can refer to the following https://kb.juniper.net/InfoCenter/index?page=content&id=KB32556
And to configure event-options on Juniper SRX, you can refer to the following https://kb.juniper.net/InfoCenter/index?page=content&id=KB36515&actp=RSS
Thanks