SRX

Sample config to configure PPPoE for Spark New Zealand

  • 1.  Sample config to configure PPPoE for Spark New Zealand

    Posted 06-17-2021 04:22
    Hi all, after a bit of research, I've worked out the configuration for an Internet connection provided by Spark New Zealand on a SRX1500.  Hopefully the excerpts below will help someone in the future! Note that I have a static IP which was picked up by pp0 even with family inet negotiate-address

    interfaces {
        ge-0/0/1 {
            vlan-tagging;
            ether-options {
                auto-negotiation;
            }
            unit 10 {
                encapsulation ppp-over-ether;
                vlan-id 10;
            }
    	}
        pp0 {
            unit 0 {
                ppp-options {
                    pap {
                        local-name "user@spark.co.nz";
                        local-password [text here]; ## SECRET-DATA
                        passive;
                    }
                }
                pppoe-options {
                    underlying-interface ge-0/0/1.10;
                    idle-timeout 0;
                    auto-reconnect 10;
                    client;
                }
                family inet {
                    mtu 1492;
                    negotiate-address;
                }
            }
        }
    }
    routing-options {
        static {
            route 0.0.0.0/0 next-hop pp0.0;
        }
    }​
    Any feedback would be appreciated!