I'm trying to get my head around this...
I have SRX's at branch sites, and bigger SRX's at two hub sites.
The branch sites connect to the hub sites with ADVPN over the internet.
I would like to configure CoS, to prioritise certain traffic. Teams for example.
I've been reading the article below. It says that CoS queueing is not supported on an ADVPN tunnel, but it is supported on a virtual channel.
I haven't used virtual channels before, so bear with me, but do I configure the virtual channel at the hub side, or both the hub and spoke side?
Thanks!
Understanding CoS Support on st0 Interfaces
Juniper |
remove preview |
|
Understanding CoS Support on st0 Interfaces |
Starting with Junos OS Release 15.1X49-D60 and Junos OS Release 17.3R1, class of service (CoS) features such as classifier, policer, queuing, scheduling, shaping, rewriting markers, and virtual channels can now be configured on the secure tunnel interface (st0) for point-to-point VPNs. |
View this on Juniper > |
|
|