SRX

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Default SNMP traps by default

  • 1.  Default SNMP traps by default

    Posted 05-08-2021 14:07
    Hi everyone,
     If SRX is configured with minimum SNMP config show below:
    set snmp community abc123 authorization read-only
    set snmp community abc123 clients 192.168.1.1
    What kind of traps are sent out by SRX by default ? Is there anyway we can see them and the criteria that triggers them?
    Thanks and have a nice weekend!!

    ------------------------------
    zee
    ------------------------------


  • 2.  RE: Default SNMP traps by default

    Posted 05-08-2021 19:20

     

    It will send all traps after you will add

    set snmp trap-group abc123 targets  192.168.1.1

     


    Juniper Business Use Only