SRX

 View Only
last person joined: 14 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  Transparent Mode in vSRX

    Posted 08-18-2021 15:47
    Dear All,
     I have tried transparent mode in vSRX versions 15.1, 19.2 and 20.3R1.
    My problem is I can't even create bridge domain and interface cannot use family "bridge".
    I enabled l2-learning in protocols and rebooted but still cannot use bridge.
    It also show the "Transparent bridge" but no luck.
    Can anyone please kindly guide me on this?
    Thanks billions for your support.

    set protocols l2-learning global-mode transparent-bridge

    root# run show ethernet-switching global-information  
    Global Configuration:

    MAC aging interval    : 300          
    MAC learning          : Enabled      
    MAC statistics        : Disabled     
    MAC limit Count       : 65535        
    MAC limit hit         : Disabled     
    MAC packet action drop: Disabled     
    LE  aging time        : 1200         
    LE  VLAN aging time   : 1200         
    Global Mode           : Transparent bridge