SRX

Expand all | Collapse all

SRX 4600 40Gb Reth support

  • 1.  SRX 4600 40Gb Reth support

    Posted 02-11-2021 07:15
    Hi,

    I would like to know if the Juniper SRX 4600 models support Redundant Ethernet on the 40Gb ports.

    Thank you.


    ------------------------------
    I A
    ------------------------------


  • 2.  RE: SRX 4600 40Gb Reth support

    Posted 02-16-2021 05:43
    Hi Community,

    Does anybody have an answer to this? I appreciate it.

    ------------------------------
    I A
    ------------------------------



  • 3.  RE: SRX 4600 40Gb Reth support

    Posted 02-16-2021 09:32
    Hi,

    RETH means chasiss cluster. All srx seriex support chassis cluster. So it should support even u use 100g.

    Thanks


  • 4.  RE: SRX 4600 40Gb Reth support

    Posted 02-16-2021 10:08
    Hi fellow community member,

    The reason I asked this question, is because I was referring to the following Juniper documentation on Chassis Cluster Redundant Ethernet https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster-redundant-ethernet-interfaces.html

    Where it stated the following,
    On SRX5600, and SRX5800 devices, interfaces such as 10-Gigabit Ethernet (xe), 40-Gigabit Ethernet, and 100-Gigabit Ethernet can be redundant Ethernet (reth) interfaces.
    However no mention of the SRX 4600, which also has 40/100Gb QSFP ports. Maybe the author of the page forgot to add the SRX 4600 series in that sentence.

    Thank you for confirming kronicklez.


    ------------------------------
    I A
    ------------------------------



  • 5.  RE: SRX 4600 40Gb Reth support

    Posted 02-17-2021 02:48
    SRX4600 supports reth interfaces based on both 10G, 40G and 100G interfaces - they just need to match with port speeds on each cluster node.

    ------------------------------
    --
    Jonas Hauge Klingenberg - Juniper Ambassador
    ------------------------------