Hello,
The SRX220 is an EOL device and it doesn't support NCP or Juniper Secure Connect.
It does support Dynamic VPN using Pulse Secure client but Pulse Secure VPN is not supported on
iPhone, iPad, Android and Blackberry when connecting to the SRX. For more information, please refer to the following KB article - https://kb.juniper.net/InfoCenter/index?page=content&id=KB23960&cat=SRX_220&actp=LIST
------------------------------
***π«π ππππ ππππ ππππππ ππ πΊπππππ
, ππ ππ ππ
π
ππππππ ππππ πππππ***
π½ππππππ,
ππππ ππππππ.
------------------------------
Original Message:
Sent: 04-01-2021 10:35
From: Unknown User
Subject: Recommendation for VPN - Android to SRX
I'm semi familiar with IKE/IPSEC VPN setups on Juniper SRX series devices, but mostly just between SRX devices. Recently I wanted to setup a VPN that an android client can connect to. I tried Pulse and have that connecting on a Windows client but discovered that Pulse for Android can't connect to SRX's, only Pulse appliances. So I'm looking for a recommendation, what's the best/easiest method for setting up a VPN that can be connected to from an Android device? Is the Juniper Secure Connect client the way to go? So far Iad any sucess configuring this properly Or should I try to use Android's integrated VPN (although I tried this without luck so far)? I thought I'd be able to find something on this fairly easily but most of what I'm finding when searching is connecting via the Pulse client.